With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica’s AE3300 gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world’s finest recording studios. The hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. it’s the new standard in live audio.

Exceptional performance for exceptional performers

Same element as the classic AT4033 studio microphone

Well-tempered polar pattern with outstanding rejection qualities

Superior anti-shock engineering ensures low handling noise and quiet performance

High-quality double-sided PCB uses surface-mount components. Extensive grounding plane and attention to best-practice grounding methods minimize electrical noise

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity

Robust all-metal design for enduring dependability on the road

Quiet-Flex® stand clamp provides silent, flexible microphone positioning

Integral 80 Hz HPF switch and 10 dB pad

Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	30-18,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-42 dB (7.9 mV) re 1V at 1 Pa
Impedance	150 ohms
Maximum Input Sound Level	147 dB SPL, 1 kHz at 1% T.H.D.; 157 dB SPL, with 10 dB pad (nominal)
Dynamic Range	128 dB, 1 kHz at Max SPL
Signal to Noise Ratio	75 dB, 1 kHz at 1 Pa
Phantom Power Requiremens	11-52V DC, 3 mA typical
Weight	300 g
Dimensions	7.05″ (179.0 mm) long, 1.97″ (50.0 mm) head diameter, 1.30″ to 0.87″ (33.0 mm to 22.0 mm) tapered body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories	AT8470 Quiet-Flex® stand clamp for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch
Pollar Pattern
Frequncy Response