System10 Pro wireless system. Two RU13 receivers one HH and one BP transmitters (No BP mic) AT ATW-1312

$934.95

Learn More Book a Demonstration
Request Commercial Quantities
Request a Price Match

Financing options

About the System10 Pro wireless system. Two RU13 receivers one HH and one BP transmitters (No BP mic) AT ATW-1312

Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two ATW-T1001 UniPak® body-pack or ATW-T1002 handheld transmitters, or one of each. Both the receiver chassis and transmitters feature easy-to-read displays.

OVERALL SYSTEM SPECIFICATIONS

Operating Frequencies 2.4 GHz ISM band

Dynamic Range >109 dB (A-weighted), typical

Total Harmonic Distortion <0.05% typical

Operating Range 60 m (200') Open range env. with no interfering signals

Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures

Frequency Response 20 Hz to 20 kHz

Depending on microphone type

RECEIVER SPECIFICATIONS

Receiving System Diversity (frequency/time/space)

Output Connectors Remote Receiver Connector: RJ45

Link Connector: RJ12

Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV

Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external

Dimensions 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D

Net Weight 940 grams (33.2 oz)

Accessory Included Power supply

Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

BODY-PACK TRANSMITTER SPECIFICATIONS

RF Power Output 10 mW

Spurious Emissions Following federal and national regulations

Input Connections Four-pin Locking Connector

Pin 1: GND, Pin 2: INST INPUT,

Pin 3: MIC INPUT, Pin 4: DC BIAS +9V

Batteries Two 1.5V AA

not included

Battery Life >7 hours (alkaline)

Depending on battery type and use pattern

Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D

Net Weight 100 grams (3.5 oz)

without batteries

HANDHELD TRANSMITTER SPECIFICATIONS