Call us 03 9672 2222 | $7.95 Flat rate shipping Australia-wide

Tascam High Definition Audio Master Recorder DA-3000

Tascam ACCMITA48358
Tascam High Definition Audio Master Recorder DA-3000
Learn More Book a Demonstration
Request Commercial Quantities
Request a Price Match

Financing options

About the Tascam High Definition Audio Master Recorder DA-3000

Features at-a-glance

To Top
  • Stereo recording to SDHC card or CF card
  • PCM recording format: BWF (44.1/48/88.2/96/176.4/192kHz, 16/24bit)
  • DSD recording format: DSDIFF/DSF (2.8/5.6MHz)
  • SD card slot (supports 4 to 32GB SDHC cards)
  • CF card slot (supports UDMA)
  • WAV file playback
  • Cascade function enables simultaneous operation of multiple units
  • Recording 2 mono files from stereo input possible
  • Mark functions can be used set up to 99 points per file (mark information can be used in software that supports BWF format)
  • When recording, designation of the recording file folder possible
  • Synchronized recording using level, stop time and recording start delay time setting
  • Input level can be adjusted in 0.5dB step
  • Using automatic track incrementing function, new files can be created automatically while continuing to record when a condition (level, file size, digital input) set in advance occurs
  • Manual track incrementing function can be used whenever you like to create a new track while continuing to record
  • Automatic mark functions can be used to easily check problems (levels, word clock unlocking) detected during recording
  • File name format can be set to either a user-defined word or the date and time
  • Repeat playback function (all files or single file)
  • Folder playback function can be used to play all files in a folder
  • Playlist function allows files to be programmed in advance for playback
  • Divide and delete functions can be used to manage files that are already recorded
  • UNDO function can be used to cancel the previous operation
  • USB host port supports copying between USB flash drives and CF/SDHC cards
  • File names can be changed
  • Direct location possible when a USB keyboard is connected
  • Word clock master can be set to Internal, Word input or Digital inputs
  • Analog input and output reference levels can be set to -9/-14/-16/-18/-20dBFS
  • Digital input has a sampling rate converter (supports 32 to 216kHz)
  • Audio files prepared on a computer can be played back (if in a format supported for playback by this unit)
  • Oscillator function (440Hz, 1kHz, 10kHz)
  • Input monitoring function allows input signals to be output without recording
  • Updating is possible
  • EI core transformer used in power supply section
  • Dual mono circuits eliminate interference between left and right channels
  • Fully-balanced circuits realize low noise
  • 128x64 OEL display with a wide viewing angle
  • 24-dot stereo LED level meters with adjustable brightness make checking levels easy
  • TCXO with 1ppm precision
  • Backup memory stores settings even when the power is off
  • Fanless design eliminates unwanted noise
  • Aluminum front panel harmonizes with other studio equipments design
  • Operation possible using included RC-10 wireless remote control
  • Standard 1/4" headphones jack provides 45mW/ch output
  • USB port for USB keyboard (supports USB 1.1)
  • USB port for USB flash drive (supports USB 2.0)
  • XLR digital input/output (supports AES3-2003 and IEC60958-4:AES/EBU formats)
  • RCA Coaxial digital input/output (supports IEC60958-3:S/P DIF format)
  • BNC digital input/output for DSD (supports SDIF-3 and DSD-raw formats)
  • RCA analog unbalanced input/output
  • XLR analog balanced input/output
  • EIA 1U rackmount size
  • RoHS compliant

* Don't use a wireless remote controller when you use multiple units except using the cascade function.
* Please take 1U or more of blank space above the DA-3000 for ventilation.

DA-3000 SPECIFICATIONS

Supported media

 
SD Supports 4GB to 32GB SDHC cards
(Media ejection method: push-push)
CF Supports 1GB to 64GB Type I CF cards
USB (Playback and copying only) Supports 2GB to 64GB USB flash drives
Recording and playback formats  
PCM BWF(rec/play) / WAV(playback only),
44.1/48/88.2/96/176.4/192kHz,
16/24bit
DSD DSDIFF / DSF,
2.8224/5.6448MHz
Number of channels 2 mono(or 1 stereo)
ANALOG INPUTS  
UNBALANCED  
Connector RCA pin jacks
Standard input level -10dBV
Maximum input level +6dBV
Minimum input level -22dBV
Input impedance 22k ohms or greater
BALANCED  
Connector XLR-3-31(1:GND,2:HOT,3:COLD)
Standard input level +4dBu
+6dBu(only when maximum input level is +15dBu)
Maximum input level +15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
Minimum input level -8dBu
-6dBu(only when maximum input level is +15dBu)
Input impedance 10k ohms or greater
ANALOG OUTPUTS  
UNBALANCED  
Connector RCA pin jacks
Standard output level -10dBV
Maximum output level +6dBV
Output impedance 200 ohms or less
BALANCED  
Connector XLR-3-31(1:GND,2:HOT,3:COLD)
Standard output level +4dBu
+6dBu(only when maximum input level is +15dBu)
Maximum output level +15dBu,+18dBu,+20dBu,+22dBu,+24dBu(switchable in menu)
Output impedance 100 ohms or less
DIGITAL INPUT  
S/PDIF,CASCADE UNBALANCED
Connector RCA pin jacks
Format IEC60958-3(S/PDIF)
Input impedance 75 ohms
Input frequency  
when SRC OFF 44.1/48/88.2/96/176.4/192kHz
when SRC ON 32 - 216kHz
Allowable frequency deviation +/-100ppm(when SRC OFF)
AES/EBU BALANCED
Connector XLR-3-31(1:GND,2:HOT,3:COLD)
Format AES3-2003/IEC60958-4(AES/EBU)
Input impedance 110 ohms
Input frequency  
when SRC OFF 44.1/48/88.2/96/176.4/192kHz
when SRC ON 32 - 216kHz
Allowable frequency deviation +/-100ppm(when SRC OFF)
SDIF-3 UNBALANCED
Connector BNC Connector x 2(L/R)
Format SONY SDIF-3/DSD-raw
Input impedance 75 ohms +/-20%
Clock synchronization frequency 44.1kHz
DIGITAL OUT  
S/PDIF,CASCADE UNBALANCED
Connector RCA pin jacks
Format IEC60958-3(S/PDIF)
Output impedance 75 ohms
AES/EBU BALANCED
Connector XLR-3-31(1:GND,2:HOT,3:COLD)
Format AES3-2003/IEC60958-4(AES/EBU)
Output impedance 110 ohms
SDIF-3 UNBALANCED
Connector BNC Connector x 2(L/R)
Format SONY SDIF-3/DSD-raw
Output impedance 10 ohms +/-20%
Clock synchronization frequency 44.1kHz
WORD SYNC IN  
Connector BNC Connector
Input level 5V TTL equivalent
Input impedance 75 ohms +/-10%
Input frequency 44.1k/48k/88.2k/96k/176.4k/192k Hz
Allowable frequency deviation +/-100ppm
WORD SYNC THRU/OUT  
Connector BNC Connector
Output level 5V TTL equivalent
Output impedance 75 ohms +/-10%
Output frequency 44.1k/48k/88.2k/96k/176.4k/192k Hz
Frequency stability +/-1ppm or less(Ta=25?C)
USB  
DEVICE  
Connector 4-pin USB A-type
Protocol USB 2.0 HIGH SPEED(480Mbps)
Power rating DC 5.0V 0.5A
KEYBOARD  
Connector 4-pin USB A-type
Protocol USB 1.1 FULL SPEED(12Mbps)
Power rating DC 5.0V 0.2A
Control input and output  
Infrared receiver TASCAM RC-10 wireless remote controller
PHONES  
Connector Standard 6.3mm (1/4') stereo jack
Maximum output 45mW + 45mW (into 32 ohms load, 0.1% distortion)
Power AC120V, 60Hz(US/Canada Version)
AC220-240V, 50-60Hz(UK/EUR/Australia Version)
Power consumption 24W
Dimensions 483(W)×45(H)×305(D)mm
weight 4.2kg
Operating temperature range 0 - +40?C
Standard accessories 3P power cord, Wireless remote controller (TASCAM RC-10), coin battery for testing remote control (preinstalled), screw kit for rack-mounting, warranty card, Owner's manual

 

Audio performance
Recording
Frequency response  
PCM 20 - 20kHz +0.1dB/-0.5dB (Fs=44.1k/48kHz,JEITA)
20 - 40kHz +0.1dB/-1dB (Fs=88.2k/96kHz,JEITA)
20 - 80kHz +0.1dB/-6dB (Fs=176.4k/192kHz,JEITA)
DSD 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
Distortion
(THD+N, 1kHz)
0.003% or less (Ref:-16dB/BALANCED,JEITA)
0.005% or less (UNBALANCED,JEITA)
S/N ratio  
PCM(24bit mode) 113dB or higher (Ref:-20dB/BALANCED,JEITA)
111dB or higher (UNBALANCED,JEITA)
DSD 106dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
104dB or higher (UNBALANCED,AES-17 20k LPF)
Crosstalk(1kHz) 108dB or higher (JEITA)
Playback
Frequency response
PCM 20 - 20kHz +/-0.1dB (Fs=44.1k/48kHz,JEITA)
20 - 40kHz +0.1dB/-0.3dB (Fs=88.2k/96kHz,JEITA)
20 - 80kHz +0.1dB/-3dB (Fs=176.4k/192kHz,JEITA)
DSD 20 - 50kHz +0.1dB/-3dB (DSD,JEITA)
20 - 100kHz +0.1dB/-12dB (DSD,JEITA)
Distortion
(THD+N, 1kHz)
0.003% or less (Ref:-16dB/BALANCED,JEITA)
0.001% or less (UNBALANCED,JEITA)
S/N ratio  
PCM 118dB or higher (Ref:-20dB/BALANCED,JEITA)
116dB or higher (UNBALANCED,JEITA)
DSD 116dB or higher (Ref:-20dB/BALANCED,AES-17 20k LPF)
114dB or higher (UNBALANCED,AES-17 20k LPF)
 
Read More