Call us 03 9672 2222 | $7.95 Flat rate shipping Australia-wide

Tascam USB Audio Interface US-125M

CMI Tascam ACCMITA42943
Tascam USB Audio Interface US-125M
Learn More Book a Demonstration
Request Commercial Quantities
Request a Price Match

About the Tascam USB Audio Interface US-125M

The US-125M is an USB audio interface with Mixer functionality. It combines a mic, instrument and line source with a computer audio signal and it feeds the mix to your computer via USB. The US-125M provides up to 16 bit/48 KHz audio resolution and is ideal for broadcasting (live streaming) over the internet. It features four inputs with dedicated level controls: a Microphone input (balanced XLR/TRS on rear or unbalanced mini jack on front) with switchable limiter and Signal/Overload indicator, a Guitar input (standard phone jack), a Stereo line input (RCA) and a Stereo audio input from computer via USB. This USB-powered device is housed in a solid aluminum case, and can also be used as a simple stand-alone mixer.                         

Main Features

  • USB audio interface with mixer functionality
  • Combines a mic, instrument and line source with a computer audio signal and feeds the mix to your computer via USB
  • Ideal for broadcasting (live streaming) over the internet
  • Four inputs with dedicated level controls:
    • Microphone input (balanced XLR/TRS on rear or unbalanced mini jack on front) with switchable limiter and Signal/Overload indicator
    • Guitar input (standard phone jack)
    • Stereo line input (RCA)
    • Stereo audio input from computer via USB
  • Stereo audio output to computer via USB or directly to RCA output jacks
  • Monitor output (RCA) and headphones output (mini-jack) with level control
  • Zero-latency hardware monitoring
  • Can be used as a simple stand-alone mixer
  • Operates using standard Windows (WDM) and Mac OS X (CoreAudio) audio drivers
  • Audio resolution up to 16 bit/48 kHz
  • USB 2.0 equipped (also supports USB 1.1)
  • USB-powered, no AC adapter required
  • Solid aluminum case

US-125M SPECIFICATIONS

??
Supported sampling frequency 32/44.1/48kHz
Supported bit rate 16bit
Analog audio Inputs  
MIC IN (REAR/XLR)  
Connector XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
Input impedance 2.2k ohms
Nominal input level -64dBu +/-3dB to -44dBu +/-3dB
Maximum input level -28dBu +/-3dB
MIC IN (REAR/TRS)  
Connector 6.3mm(1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
Input impedance 2.2k ohms
Nominal input level -64dBu +/-3dB to -44dBu +/-3dB
Maximum input level -28dBu +/-3dB
MIC IN (FRONT)  
Connector 1/8"(3.5mm) Stereo Mini Jack, UNBALANCED, procldes plug-in power
Input impedance 2.2k ohms
Nominal input level -64dBu +/-3dB to -44dBu +/-3dB
Maximum input level -28dBu +/-3dB
INST IN  
Connector 6.3mm(1/4") TS-jack(T:HOT, S:GND), UNBALANCED
Input impedance 1M ohms
Maximum input level +6dBV
LINE IN  
Connector RCA pin-jack, UNBALANCED
Nominal input level
(INPUT:MIN)
-15dBV
Maximum input level +21dBV
Analog audio Inputs  
LINE OUT RCA?????????????
Connector RCA pin-jack, UNBALANCED
Output impedance 200ohms
Maximum output level +3dBV +/-2dB (+1.41Vrms)
PHONES  
Connector 1/8"(3.5mm) Stereo Mini Jack
Maximum output level 15mW+15mW(32ohms loaded)
USB  
Connector USB B type 4-pin
Format USB 2.0 HIGH SPEED/USB 2.0 FULL SPEED(12MHz USB 1.1 equibalent)
Power USB bus powered
Power consumption 1W
Dimensions 150?W)× 40.6?H)× 122?D?mm
Weight 500g
Operating temperature 5 to 35?C
Accessories USB cable(1.5m), Warranty card, Quick Start Guide, Owner's manual

 

Audio performance
Frequency response 20Hz to 20kHz, +/-2dB(MIC to LINE, LINE to LINE, INST to LINE, PC to LINE)
Noise level XLR-3-31 : -75dBV or less (when direct monitoring 1kHz, MIC IN to LINE OUT, MIC in knob set at -20dB below maximum, OUTPUT knob set at -10dB below maximum, JEITA)
THD 0.1% or less (when direct monitoring 1kHz, MIC IN to LINE OUT, MIC in knob set at -20dB below maximum, OUTPUT knob set at -10dB below maximum, JEITA)
A/D Converter  
THD 0.01%
Dynamic range 89dB
S/N ratio< 89dB
Channel separation 85dB
D/A Converter  
THD 0.005%
Dynamic range 93dB
S/N ratio 96dB
Channel separation 92dB

 

Operating system requirements
Windows
OS  Windows XP?32bit SP2 or more, 64bit SP2 or more
Windows Vista?32bit SP2 or more, 64bit SP2 or more
Windows 7?32bit, 64bit
Windows 8?32bit, 64bit
DRIVER WDM(standard Windows driver)
Macintosh
OS MacOS X Panther(10.3.9), Mac OS X Tiger(10.4.11), Mac OS X Leopard(10.5.6), Mac OS X Snow Leopard(10.6), OS X Lion(10.7), OS X Mountain Lion(10.8)
DRIVER Core Audio(standard Macintosh driver)
 
Read More