$389.95
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimized, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response, a selectable high-pass filter at 80Hz is available, which will prevent low-end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low-quality audio circuitry.
The microphone uses a standard sized shoe mount for on-camera use and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia and covered by RØDE Microphones' industry-leading 10-year warranty.
The ProMaster Triple Bracket is can hold up to 3 accessory items securely above your camera using its hot shoe. Microphones, lights, transceivers and similar accessories can now be easily positioned on your camera and within reach.
Each of the 3 platforms on the triple bracket is set to a different height so you can maximize space by selectively placing various items on it. The bracket is constructed of metal for excellent strength (bracket is aluminium/ cold shoes are stainless steel). It has a locking wheel to ensure a tight connection to your camera. It also has a threaded 1/4-20" port on the bottom of its cold foot allowing you to alternatively connect the bracket to a tripod, light stand, flex arm, or another grip item.
The PROMASTER LED120SS SUPER SLIM RECHARGEABLE LED LIGHT will help you get awesome pictures and video. With 120 ultra-bright daylight-balanced LED. the LED120SS gives you perfect light when and where you need it. The super slim design is about one half the size of other lights with this type of output and is a perfect match for mirrorless and smaller DLSR cameras. The built-in rechargeable battery allows for up to 2 hours of full power runtime.
Includes: Light, 5V/1A Charger, USB Charging Cable, Camera mount, 3200°K and Diffusion filters
120 High Brightness LED Lights
Light Output: 1150 Lux / .5m
Power Consumption: 11 watts
Color Temperature: 5800° K ± 200° K / 3200° K with panel
Battery: 3.7V/4200mAh Lithium Polymer Battery
Charging: DC 5V/1000mAh Micro USB Port
Dimensions: 5 ½ x 2 7/8 x ¾” / 14 x 7.3 x 1.9cm
Weight: 6.4 oz. / 181g
Acoustic Principle Line Gradient
Active Electronics JFET impedance converter
Capsule 0.50"
Polar Pattern Supercardioid
Address Type End
Frequency Range 40Hz - 20kHz(selected HPF @80)
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.9dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 14dB-A
Power Options 9V Battery
Weight 85gm
Dimensions 100mmH x 75mmW x 170mmD
Output Minijack Output
Warranty 1 year
