$526.95
TASCAM's DR-60DmkII, an update of the award winning DR-60D, is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera’s microphone in. ProSound Network Best of Show
The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM’s decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8” stereo connector for wireless and lavaliere microphones.
A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls.
Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design.
Reach beyond the limited performance of your camera’s audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast.
Recording media | SD card(64MB to 2GB), SDHC card(4GB to 32GB) |
Recording format | |
WAV | 44.1/48/96kHz, 16/24bit |
BWF | 44.1/48/96kHz, 16/24bit |
Number of channels | 4-channel (stereo x2) |
Analog audio input | |
1/L, 2/R connectors | |
Connector | XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4")TRS standard jack |
Set to "MIC / MIC+PHANTOM" | |
Input impedance | 2k ohms |
Phantom power | 48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH) |
Maximum input level | 0dBu |
Minimum input level | -72dBu |
MIC input gain | TRIM MAX |
LOW | +11dB |
MID | +36dB |
HIGH | +52dB |
HIGH+PLUS | +64dB |
Set to “LINE” | |
Input impedance | 10k ohms or more |
Standard input level | +4dBu |
Maximum input level | +24dBu |
3-4 connector | |
Connector | 3.5mm (1/8") stereo mini jack (this connector can be supplied plug-in power) |
Input impedance | 10k ohms |
Maximum input level | +10dBV |
Minimum input level | -50dBV |
MIC input gain | TRIM MAX |
LOW | +3dB |
HIGH | +26dB |
HI + PLUS | +38dB |
CAMERA IN connector | |
Connector | 3.5mm (1/8") stereo mini jack |
Input impedance | 10k ohms |
Standard input level | -10dBV |
Maximum input level | +6dBV |
Analog audio output | |
CAMERA OUT connector | |
Connector | 3.5mm (1/8") stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -50dBV |
Maximum output level | -30dBV |
LINE OUT connector | |
Connector | 3.5mm (1/8") stereo mini jack |
Output impedance | 200 ohms |
Standard output level | -10dBV |
Maximum output level | +10dBV |
PHONES connector | |
Connector | 3.5mm (1/8") stereo mini jack |
Maximum output level | 50mW + 50mW |
USB | |
Connector | Mini-B type |
Format | USB2.0 HIGH SPEED mass storage class |
REMOTE | |
Connector | 2.5mm TRS jack |
Power | Four AA batteries(Alkaline or NI-MH), USB bus power, Dedicated AC adapter(TASCAM PS-P515U, sold separately), Dedicated external battery pack(TASCAM BP-6AA, sold separately) |
Power consumption | 5.4W |
Continuous operation time | 2ch WAV, 44.1kHz, 16bit rec |
DR-60D | |
Alkaline batteries (EVOLTA) | About 2:30 min (Phantom on) About 4:30 min (Phantom off) |
NI-MH batteries (eneloop) | About 3:15 min (Phantom on) About 5:00 min (Phantom off) |
NI-MH batteries (eneloop pro) | About 3:45 min (Phantom on) About 6:00 min (Phantom off) |
DR-60D+BP-6AA | |
Alkaline batteries (EVOLTA) | About 5:30 min (Phantom on) About 10:30 min (Phantom off) |
NI-MH batteries (eneloop) | About 7:30 min (Phantom on) About 12:00 min (Phantom off) |
NI-MH batteries (eneloop pro) | About 9:30 min (Phantom on) About 14:30 min (Phantom off) |
Dimensions | 133(W)×93.2(H)×78(D)mm (with the top adapter attached) |
Weight | 510g (not including batteries) |
Operating temperature | 0?C to 40?C |
Standard accessories | USB cable, warranty card, Owner's manual |
Computer compatibility | |
Windows | |
OS | Windows XP, Windows Vista, Windows 7, Windows 8 |
CPU | Pentium 300MHz or more |
RAM | 128MB or more |
USB | recommended: USB2.0 |
Macintosh | |
OS | Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), OS X Mountain Lion(V10.8) |
CPU | Power PC, iMac, G3, G4 266MHz or more |
64MB or more | |
USB | recommended: USB2.0 |
Audio performance | |
Frequency response | 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA) 20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA) |
Distortion | 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
S/N ratio | 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA) |
Equivalent input noise | -120dBu or more |
The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.
File format(recording setting) | SD/SDHC card capacity(hours:mintes) | ||||
1GB | 2GB | 4GB | 8GB | ||
WAV/BWF 16bit(STEREO) | 44.1kHz | 1:41 | 3:22 | 6:44 | 13:28 |
48kHz | 1:33 | 3:06 | 6:12 | 12:24 | |
96kHz | 0:46 | 1:33 | 3:06 | 6:12 | |
WAV/BWF 24bit(STEREO) | 44.1kHz | 1:07 | 2:15 | 4:30 | 9:00 |
48kHz | 1:02 |