Call us 03 9672 2222 | $7.95 Flat rate shipping Australia-wide

Tascam Tascam DR-60 Audio Recorder For Dslr DR-60D

Tascam ACCMITA48355
Tascam Tascam DR-60 Audio Recorder For Dslr DR-60D
Learn More Book a Demonstration
Request Commercial Quantities
Request a Price Match

Financing options

About the Tascam Tascam DR-60 Audio Recorder For Dslr DR-60D

 

TASCAM's DR-60DmkII, an update of the award winning DR-60D, is the audio recording solution for on-set filmmakers and videographers. The streamlined design fits perfectly under a DSLR camera rig, without relying on bulky recorders or the limited audio quality of the camera’s microphone in. ProSound Network Best of Show 

The DR-60DmkII is the next generation of 4-track solid-state recording, based on TASCAM’s decades of recording innovation. The upgraded HDDA microphone preamps provide up to 64dB of gain, capturing every nuance of a performance. Up to four channels at a time can be recorded to the internal SD Card, at up to 96kHz/24-bit WAV file resolution. Two of the mic inputs utilize locking XLR connectors with 48V phantom power, the other two use an 1/8” stereo connector for wireless and lavaliere microphones.

A Camera Output sends the mic mix to the camera for later synchronization, and a Camera Input is provided for monitoring playback. An additional headphone out and line out assist the crew during filming. The DR-60DmkII is designed for low-noise operation, including soft touch buttons and dedicated gain controls.

Multiple recording modes are available on the DR-60DmkII. Four-Channel Mode records all four microphone inputs. Dual Recording is an alternate setting, capturing a copy of your audio at a lower level for a distortion-free safety track. Menus and operation are well laid out, owing to decades of innovative recording design.

Reach beyond the limited performance of your camera’s audio to capture the other half of your film. At a cost less than competing preamps, the TASCAM DR-60DmkII is the ultimate 4-track recorder designed for filmmakers, television, live events and web broadcast.

 

  • Record to SD/SDHC card (Up to 32GB)
  • Simultaneously record up to 4 tracks
  • Record Modes: MONO, STEREO, DUAL MONO, DUAL STEREO, 4-CHANNEL
  • Recording format: 44.1/48/96kHz, 16 or 24-bit,  WAV/BWF
  • TASCAM HDDA microphone preamps wth 120dB EIN and 64dB of gain
  • Recording levels can be adjusted independently for the 1/L, 2/R and 3-4 inputs
  • Two combo XLR/TRS inputs support +4dBu mic/line level input 
  • Phantom power to channels 1/2 (24V or 48VDC on XLRF)
  • Plug-in power and high-output mic input supported on inputs 3-4
  • CAMERA OUT connector for output from the DR-60DmkII mixer (adjustable gain)
  • CAMERA IN connector for sound monitoring from the camera
  • Independent adjustable LINE OUT and HEADPHONE jacks for high-quality sound output
  • 50mW/ch headphone amplifier
  • Tripod mounting socket (bottom) and mounting screw attachment (top)
  • Handles protect the screen and can be used to attach a shoulder strap
  • Soft-Touch Rubber Keys for silent operation
  • HOLD switch to prevent accidental operation
  • QUICK button feature for easy access to various functions
  • 128x64 pixel LCD with backlight
  • USB 2.0 connection for high-speed transferring of files
  • Mini USB cable included
  • Operates on 4-AA batteries, an AC adapter (sold separately) or USB bus power
  • Can extend battery life with BP-6AA battery pack (sold separately)
  • Dedicated remote control jack for the wired RC-10 remote control or RC-3F footswitch (both sold separately)
  • Internal mixer: PAN and LEVEL controls
  • Low cut filter (40/80/120Hz)
  • Limiter (1/L and 2/R can be selected for linked operation)
  • Delay function for microphone distance adjustment (up to 150ms)
  • M-S decode functionSlate tone generator (AUTO/MANUAL)
  • Selectable duration of slate tone from four positions (0.5/1/2/3 sec, when auto-generated)
  • Selectable slate tone generation. (3 positions: OFF/HEAD/HEAD+TAIL, when auto-generated)
  • File naming format can be set to use a user-defined word or date
  • Dual-recording function allows two files to be recorded simultaneously at different levels
  • Auto-record function can automatically start and stop recording at set leve
  • lPre-recording function allows the unit to record a 2 second sound buffer before recording is activated
  • Self-timer function for solo recording
  • New file starts recording automatically without interruption when maximum file size is reached
  • Track incrementing function allows a recording to be split by creating a new file when desired
  • Jump back and play function
  • Equalizer function for playback, and level alignment function to enhance the perceived overall sound pressure
  • Resume function to memorize the playback position before the unit is turned off
  • MARK function up to 99 points per audio track
  • DIVIDE function
Recording media SD card(64MB to 2GB), SDHC card(4GB to 32GB)
Recording format  
WAV 44.1/48/96kHz, 16/24bit
BWF 44.1/48/96kHz, 16/24bit
Number of channels 4-channel (stereo x2)
Analog audio input  
1/L, 2/R connectors  
Connector XLR-3-31 (1:GND, 2:HOT, 3:COLD)/6.3mm(1/4")TRS standard jack
Set to "MIC / MIC+PHANTOM"  
Input impedance 2k ohms
Phantom power 48V +/-4V(10mA/CH) / 24V +/-4V(10mA/CH)
Maximum input level 0dBu
Minimum input level -72dBu
MIC input gain TRIM MAX
LOW +11dB
MID +36dB
HIGH +52dB
HIGH+PLUS +64dB
Set to “LINE”  
Input impedance 10k ohms or more
Standard input level +4dBu
Maximum input level +24dBu
3-4 connector  
Connector 3.5mm (1/8") stereo mini jack (this connector can be supplied plug-in power)
Input impedance 10k ohms
Maximum input level +10dBV
Minimum input level -50dBV
MIC input gain TRIM MAX
LOW +3dB
HIGH +26dB
HI + PLUS +38dB
CAMERA IN connector  
Connector 3.5mm (1/8") stereo mini jack
Input impedance 10k ohms
Standard input level -10dBV
Maximum input level +6dBV
Analog audio output  
CAMERA OUT connector  
Connector 3.5mm (1/8") stereo mini jack
Output impedance 200 ohms
Standard output level -50dBV
Maximum output level -30dBV
LINE OUT connector  
Connector 3.5mm (1/8") stereo mini jack
Output impedance 200 ohms
Standard output level -10dBV
Maximum output level +10dBV
PHONES connector  
Connector 3.5mm (1/8") stereo mini jack
Maximum output level 50mW + 50mW
USB  
Connector Mini-B type
Format USB2.0 HIGH SPEED mass storage class
REMOTE  
Connector 2.5mm TRS jack
Power Four AA batteries(Alkaline or NI-MH), 
USB bus power, 
Dedicated AC adapter(TASCAM PS-P515U, sold separately), 
Dedicated external battery pack(TASCAM BP-6AA, sold separately)
Power consumption 5.4W
Continuous operation time 2ch WAV, 44.1kHz, 16bit rec
DR-60D  
Alkaline batteries (EVOLTA) About 2:30 min (Phantom on)
About 4:30 min (Phantom off)
NI-MH batteries (eneloop) About 3:15 min (Phantom on)
About 5:00 min (Phantom off)
NI-MH batteries (eneloop pro) About 3:45 min (Phantom on)
About 6:00 min (Phantom off)
DR-60D+BP-6AA  
Alkaline batteries (EVOLTA) About 5:30 min (Phantom on)
About 10:30 min (Phantom off)
NI-MH batteries (eneloop) About 7:30 min (Phantom on)
About 12:00 min (Phantom off)
NI-MH batteries (eneloop pro) About 9:30 min (Phantom on)
About 14:30 min (Phantom off)
Dimensions 133(W)×93.2(H)×78(D)mm (with the top adapter attached)
Weight 510g (not including batteries)
Operating temperature 0?C to 40?C
Standard accessories USB cable, warranty card, Owner's manual

 

Computer compatibility
Windows
OS Windows XP, Windows Vista, Windows 7, Windows 8
CPU Pentium 300MHz or more
RAM 128MB or more
USB recommended: USB2.0
Macintosh
OS Mac OS X Jaguar (V10.2), Mac OS X Panther (V10.3), Mac OS X Tiger (V10.4), 
Mac OS X Leopard (V10.5), Mac OS X Snow Leopard(V10.6.8), OS X Lion(V10.7), 
OS X Mountain Lion(V10.8)
CPU Power PC, iMac, G3, G4 266MHz or more
  64MB or more
USB recommended: USB2.0

 

Audio performance
Frequency response 20-20kHz +0.5/-2dB(LINE IN or MIC IN to LINE OUT, Fs44.1k/48kHz, JEITA)
20-40kHz +0.5/-3dB(LINE IN or MIC IN to LINE OUT, Fs96kHz, JEITA)
Distortion 0.02% or less(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA)
S/N ratio 92dB or more(LINE IN or MIC IN to LINE OUT Fs44.1k/48k/96kHz, JEITA)
Equivalent input noise -120dBu or more

 

Recording Duration

The table below shows the maximum recording time on SD/SDHC cards of different capacities for different file formats for recording.

File format(recording setting) SD/SDHC card capacity(hours:mintes)
1GB 2GB 4GB 8GB
WAV/BWF 16bit(STEREO) 44.1kHz 1:41 3:22 6:44 13:28
48kHz 1:33 3:06 6:12 12:24
96kHz 0:46 1:33 3:06 6:12
WAV/BWF 24bit(STEREO) 44.1kHz 1:07 2:15 4:30 9:00
48kHz 1:02
 
Read More